Mitsubishi wd-52628 Manual Do Utilizador

Select the antenna for the channels you want to edit.  You 
can select Ant-1 (main) or Ant-2 (Aux).

When a memorized channel number is available as both 
analog and digital, a check mark in the Prefer Digital 

box causes digital channels to be displayed and analog 
channels to be hidden (when using CH   or  ).  Remove 
the check mark to show both analog and digital choices.  

This option is not available when TV Guide On Screen® is 

enabled.

Channels can be changed in three ways:

•  Press ADJUST   or   to select the channel. 

•  Pressing CH   or   to select channels already in 

memory.

•  Enter the number directly.  Channel numbers can be 

one part, analog or digital (up to the number 16383), 
or two part for digital channels (these use a separator).  
For a two-part digital channel, press SUB/CANCEL on 
the remote to enter a separator after the first, second 
or third number, depending on the broadcaster’s 
channel information.

For digital channels, when the broadcaster has sent a 
virtual channel number, the virtual channel number is 
shown in the text box and the original digital channel 
is shown below on-screen, as a reference.

After the available channels have been memorized with 

Memorize Channels on the Setup menu, weaker channels 
can be added or unwanted channels can also be deleted.  
Press CH   or   on the remote control to see the 
channels in memory.  Press ADJUST   or   to select 

Added or Deleted for the channel shown in the Channel 

number box.

Analog channels shown on Antenna-1 or Antenna-2 can 

be named (up to four characters).  After you enter a 
name, it will appear on the TV screen, next to the channel 
number.

1.  Press ADJUST   or   to select each letter.  

2.  Press ENTER to set the letter and move to the  

 

next letter position.  

3.  Press CANCEL to move back one position. 

Digital channels are automatically named if the 
broadcaster sends the information.