Champion pp-3 Manual Do Utilizador
M A I N T E N A N C E
¾ Carefully pull the heater and wires out, exposing the electrical connections.
¾ Disconnect the electrical Connections.
¾ Remove the gasket.
Gasket
¾ Get the new heater and slide the gasket over the wires.
¾ Connect the electrical connection and slide the wires and heater into position.
¾ Install and tighten the clamp.
¾ Install the perforated cover.
¾ Turn on the main power.
Replacing Thermocouple
¾ Turn off and lockout the incoming power to the
control panel.
¾ Remove the perforated cover located at the back
of the tank by loosening the two fasteners (see
illustration in Replacing Heater).
illustration in Replacing Heater).
¾ Remove the clamp by loosening the wing nut.
¾ Carefully pull the thermocouple and wires out, exposing the electrical connections.
¾ Disconnect the electrical Connections.
¾ Remove the gasket.
¾ Get the new thermocouple
and slide the gasket over the
wires.
wires.
Thermocouple
53