Allworx 9212 Guia Do Utilizador
Phone Guide – 9212
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Revised: May 28, 2008
Page 6
Button
Light
Purpose
Soft key
Selection
Selection
None
Use the buttons below the display to select a soft key.
4.1 Messages
If the MESSAGES button is red, you have a new message in your voicemail box. The number of new
messages appears on the screen. To listen to your voicemail, press the MESSAGES button. You’ll need to
enter your password to access your messages.
messages appears on the screen. To listen to your voicemail, press the MESSAGES button. You’ll need to
enter your password to access your messages.
4.2 Intercom
1. Press
the
INTERCOM button and dial the extension of the person you would like to talk to.
2. The call is connected when the LCD screen displays Active Call.
3. Start talking. The person you called will hear you over their speaker.
4. Press
the
INTERCOM or SPEAKER button to end the call.
5. To deny an incoming Intercom request, press the IGNORE soft key.
4.3 Conference
After connecting to the first person you want on the conference call, follow these steps:
1. Press
the
HOLD button.
2. Select another Call Appearance PFK and dial the number of the second person you want on the
conference call.
3. Press
the
CONFERENCE button.
4. Press the Call Appearance PFK where the first person is on hold.
5. All three callers are now able to conference. The CONFERENCE button will be illuminated solid red.
6. One party may exit the conference by hanging up; the remaining two parties will continue to be
connected.
7. If you desire to have a private conversation with one of the parties, you may split the conference using
the following steps:
a. Use the Up / Down navigation arrows, to select the Call Appearance PFK of the person you
wish to put on hold and then press the HOLD button. (The display will show the two parties
involved in the conference).
involved in the conference).
b. You may now talk to the remaining party.
c. The Call Appearance PFK for the person on hold will be flashing. To have the person re-join the
conference, press CONFERENCE, then select the flashing Call Appearance PFK. The three-
way conference is then re-established.
way conference is then re-established.