Allworx 9212 Guia Do Utilizador

 

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com 

© 2008 Allworx. All rights reserved 

Revised: May 28, 2008 

 

Page 7 

8.  End the conference by hanging up. 

4.4 Transfer 

1. Press 

the 

TRANSFER button. The current call is placed on hold.  

2.  At the dial tone, dial the extension to where you want to transfer the call.  

3.  The call will automatically be transferred. If the recipient does not answer, the call will follow the 

recipient’s call route. 

To talk to the person to whom you are transferring the call to before the transfer goes through. 

1. Press 

the 

TRANSFER button.  

2.  Select a second Call Appearance PFK.  

3.  Dial the extension to where you want to transfer the call.  

4.  Talk to the new recipient.  

5. Press 

the 

TRANSFER button again. The two parties will now be connected. 

6.  If you want to cancel the transfer, press the RELEASE button. To return to the original caller, press the 

Call Appearance PFK where the call is currently being held.  

4.5 Release  

The RELEASE button is used to hang up an active call or to abort a new call setup, such as the middle of a 
transfer operation. 

4.6 Park  

PBX Behavior on a call appearance 

•  To park an active call, press the PARK button.   
•  The phone displays for 3 seconds the parking orbit (701 - 709) of where the call is parked. 

Key System Behavior on an outside line 

•  To place an active call in a “system-wide hold”, press the PARK button. Any phone with a PFK for this 

outside line will be able to retrieve the call. 

 

4.7 Info  

The INFO button is used to get information regarding the other buttons on your phone. For example, you can 
use the INFO button to determine the numbers that have been programmed for each speed-dial button.