Roland HPi-5 Manual Do Proprietário

 

If the data that is produced when you play the keyboard is sent to 

the sound generation section via both routes (1) and (2) as shown in 

the diagram, notes will be doubled or may be interrupted. To 

prevent this, use the “Local Off” setting to disconnect route (1).

Set Local Off if you have connected the HPi-5 to a MIDI sequencer.

 

fig.local.e

 

*

When a Roland MT series instrument is connected, it is not 

necessary to make the Local Off setting. The MT transmits a 

Local Off message when the power is turned on. If you turn on 

the power in the order of the HPi-5 

 

→

 

 MT series, Local Off will be 

set automatically.

 

If you want a performance recorded on the HPi-5 to be transmitted 

to an external MIDI device or computer, turn the “Composer Out” 

setting “On.”

 

Program changes are a type of message that tell a device to “switch 

to sound number ‘x’.” A device that receives this message will select 

the sound of the corresponding number.

When you use this setting to specify a program change (program 

number), that program number will be transmitted to a MIDI device 

connected to the HPi-5. A MIDI device that receives the program 

number will switch to the sound corresponding to that program 

number.

Normally, program changes select from 128 different sounds. 

However, some MIDI devices have more than 128 sounds. For such 

devices, Bank Select messages are combined with Program Change 

messages to select sounds. Bank Select consists of two messages: 

MSB (controller number 0; value: 0–127), and LSB (controller number 

32; value: 0–127).

 

*

Some MIDI devices cannot use bank select messages. 

Alternatively, some devices may use bank select messages, but 

ignore the LSB message.

 

Switch the Local Con-
trol setting on/off.

On, Off

 

Specify whether a re-
corded performance 
will be transmitted to 
a MIDI device.

On, Off

(1)

MIDI

MIDI

MIDI

MIDI

(2)

IN

IN

OUT

OUT

Sequencer

Memory

Sound

Generator

Each note played

is sounded twice

Thru function On

Local On

 

Transmit the 
bank select MSB.

0 (00h)–127 (7FH)

 

Transmit the 
bank select LSB.

0 (00h)–127 (7FH)

 

Transmit the pro-
gram number.

1 (00h)–128 (7FH)

HPi-5_e.book 48 ページ ２００４年１２月２１日　火曜日　午後１２時４６分