Roland HPi-5 Manual Do Proprietário

Página de 68
 
49
 
Trouble Shooting
 
If you think there’s a problem, read this first.
 
Case
Cause/Remedy
 
The power doesn’t 
come on.
 
Is the power cord connected and plugged in 
correctly? (p. 9)
 
The button doesn’t 
work.
 
Is the panel locked? (p. 11) 
Turn the power off, then back on.
 
Nothing appears 
on screen.
 
The HPi-5 uses a liquid-crystal screen, so text 
may not be displayed when the ambient tem-
perature is below freezing.
Is the music stand (screen) connection cable 
connected correctly? (p. 9)
Has the screen been turned off by the Display 
[On/Off] button? (p. 10)
If the button's indicator is dark, the screen will 
be turned off.
 
Vertical lines ap-
pear in the screen/
Color is “washed 
out” at the edges of 
the screen
 
These occur due to the nature of a liquid crys-
tal display, and do not indicate a malfunction. 
They can be minimized by adjusting the 
brightness of the screen. (p. 10)
 
No sound is heard.
 
Is the volume level of the HPi-5 (p. 10) or con-
nected device turned all the way down?
Could the “Balance” setting be set all the way 
toward “Accomp” or “Keyboard”? (p. 43)
 
No sound is heard 
(when a MIDI in-
strument is con-
nected). 
 
Does the MIDI channel match the connected 
instrument? (p. 47)
 
No sound is heard 
when the keyboard 
is played. 
 
Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is 
produced by playing the keyboard, Set Local 
Control to On. (p. 48)
 
Volume of key-
board is too low
 
Could the “Balance” setting be set all the way 
toward “Accomp”? (p. 43)
 
No sound from left-
hand section of 
keyboard
 
Is the [Pianist] button’s indicator lit? (p. 28) 
If the [Pianist] button’s indicator is lit, there 
will be no sound from the left-hand section of 
the keyboard.
 
Sounds are heard 
twice (doubled) 
when the keyboard 
is played. 
 
When the HPi-5 is connected to an external se-
quencer, set it to the Local OFF mode (p. 48). 
Alternatively, the sequencer could be set so its 
Soft Thru feature is OFF.
 
Not all played 
notes are sound-
ed.
 
The maximum number of notes that the HPi-
5 can play simultaneously is 64. Frequent use 
of the damper pedal during automatic accom-
paniment or when playing along with a song 
on floppy disk may result in performance 
data with too many notes, causing some notes 
to drop out.
 
Can't select a tone
 
Press the [
] button several times to return 
 
The tuning or pitch 
of the keyboard or 
song is off. 
 
Are the settings for the “Temperament” and 
“Stretch Tuning” correct? (p. 44)
 
Volume of accom-
paniment or inter-
nal song is too low
 
Could the “Balance” setting be set all the way 
toward “Keyboard”? (p. 43)
 
Song doesn’t play 
back
 
Does the screen indicate message, like “De-
letes the selected song. OK?” (p. 17) 
The internal songs cannot be played back 
while recorded performance data remains in 
the HPi-5’s memory. Try playing back the 
song after deleting the performance data.
 
Only the sound of a 
particular instru-
ment in a song 
does not play
 
Is the light for the Track button extinguished? 
(p. 16) 
If the button light is out, the music on that 
track is not heard. Press the track button so 
the light is illuminated.
 
Pressing the [
 
(Reset)] button 
doesn’t return to 
the beginning of 
the song. 
 
Some music files may contain settings that 
stop play at a point partway through the song. 
Press the [
 
 (
 
Reset)] button several times 
more to return to the beginning of the tune.
 
The [
 (Fwd)] 
and [
 (Bwd)] 
buttons don’t work.
 
The fast-forward and reverse buttons are ig-
nored while music files is being read in. Wait 
until processing finishes.
 
There is a slight 
delay before play-
back of a song on 
floppy disk starts. 
 
There are two types of SMF music files: for-
mat 0 and format 1. If the song uses SMF for-
mat 1 data, there will be a slight delay until 
playback starts. Refer to the booklet that came 
with the music files you’re using to determine 
the format type.
 
Can’t record
 
Has one of the track buttons for recording 
been selected? (p. 33)
It is not possible to record while the score is 
being generated. Once the unit has finished 
generating the score (i.e., when the measure 
number in the screen is no longer highlight-
ed), try the operation once again.
 
Case
Cause/Remedy
HPi-5_e.book 49 ページ 2004年12月21日 火曜日 午後12時46分