Enterasys ssr-glx19-02 Guia Do Utilizador
Chapter 16: Configuring Routing Policies on the SSR
346
CoreWatch User’s Manual
Note:
If you select the Match Length Between <number> and <number> option,
you must specify values defining the acceptable range to justify a match
to your network mask. You can specify values between 0 and 32 for the
acceptable length.
you must specify values defining the acceptable range to justify a match
to your network mask. You can specify values between 0 and 32 for the
acceptable length.
15. Specify whether or not you wish to restrict redistribution of routes that match your
defined filter by turning the Restrict redistribution of routes matching the filter option on
or off, accordingly.
or off, accordingly.
16. If you wish, you can specify a preference for the filter network by entering a value
between 0 and 65,536 in the Filter Preference box.
17. If you wish to specify additional filter networks, be sure to activate the Add more filters
option, click Next, and repeat
through
. Otherwise, click Finish.
Modifying Import Policies
You can modify import policies to change the filter and/or network specifications for one
or more import sources.
or more import sources.
To modify an existing import policy:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Import Policies object.
7.
Double-click the name of the existing import source you wish to modify.
8.
Do one of the following:
–
Double-click the Filters object and then select the name of the import source filter
you wish to modify.
you wish to modify.
–
Double-click the Network Specification object and then select the name of the
import source network you wish to modify.
import source network you wish to modify.
9.
Modify the attributes of the import source filter and/or network by editing the fields
of the Import Policy Filter dialog box or Filter Network Specification dialog box that
appears.
of the Import Policy Filter dialog box or Filter Network Specification dialog box that
appears.
These dialog boxes include some of the same fields you specified when configuring the
import policy. For more information on these fields, see
import policy. For more information on these fields, see
.
10. Click OK.