Enterasys ssr-glx19-02 Guia Do Utilizador

If you select the Match Length Between <number> and <number> option, 
you must specify values defining the acceptable range to justify a match 
to your network mask. You can specify values between 0 and 32 for the 
acceptable length.

14. Specify whether or not you wish to restrict redistribution of routes that match your 

defined filter by turning the Restrict redistribution of routes matching the filter option on 
or off, accordingly.

15. If you wish, you can specify a route metric for the filter network by entering a value 

between 0 and 255 in the Route Metric box.

16. If you wish to specify additional filter networks, be sure to activate the Add more filters 

option, click Next, and repeat 

 through 

step 15

. Otherwise, click Finish.

You can modify redistribute policies to change the network specifications for one or more 
redistribute destination protocol types associated with a particular redistribute source 
protocol type.

To modify an existing redistribute policy:

1.

Start Configuration Expert if you have not already done so.

2.

Open the configuration file you want to modify and then double-click that file’s 
Routing Configuration object.

3.

Double-click the IP Routing Configuration object.

4.

Double-click the IP Unicast Routing object.

5.

Double-click the Routing Policy Configuration object. 

6.

Double-click the Redistribute Policies object.

7.

Double-click the existing source protocol type you wish to modify.

Once the list of existing destination protocol types associated with this source protocol 
type is displayed, double-click the destination protocol type you wish to modify.

8.

Select the Network Specification object.

9.

Modify the attributes of the redistribute source network by editing the fields of the 
Filter Network Specification 

dialog box that appears.

This dialog box includes some of the same fields you specified when configuring the 
redistribute policy. For more information on these fields, see 

.

10. Click OK.