Sceptre s6500 Guia Do Utilizador
Notebook User’s Guide
90
Loading a Disc
To play a CD disc, follow the instructions listed below.
1. Press the eject button. The tray ejects from the drive.
2. Place the disc into the tray with the disc’s label facing up.
3. Push the tray back into the drive.
Do not insert any foreign objects into the disc tray. Do
not force the tray to open or close manually. When not
in use, keep the tray closed to prevent dust or dirt from
entering the drive unit. Some CD-ROM drives are
equipped with an Audio CD play button. Press this
button to play music CDs.
not force the tray to open or close manually. When not
in use, keep the tray closed to prevent dust or dirt from
entering the drive unit. Some CD-ROM drives are
equipped with an Audio CD play button. Press this
button to play music CDs.
Before using your CD-ROM for the first time, you must install the CD-ROM
device driver found on the diskette that came in your CD-ROM optional
module package.
device driver found on the diskette that came in your CD-ROM optional
module package.
Installing Device Drivers
Windows 95/98 automatically installs and configures plug and play hardware
devices including your CD-ROM drive. You do not have to install the driver.
If you need to reinstall the driver for some reason, please refer to the
corresponding driver installation procedure on the Utility diskettes that came
bundles with your Notebook.
devices including your CD-ROM drive. You do not have to install the driver.
If you need to reinstall the driver for some reason, please refer to the
corresponding driver installation procedure on the Utility diskettes that came
bundles with your Notebook.
Removing and Installing HDD Modules
Eventually you may find that your Notebook is running out of HDD space.
The HDD module provides you with additional hard disk space. The
installation of additional HDD modules is relatively simple.
The HDD module provides you with additional hard disk space. The
installation of additional HDD modules is relatively simple.
To remove and install HDD modules, please refer to Figure 6-4, Figure 6-5
and the following directions.
and the following directions.
1. Turn off the Notebook and disconnect the AC cord and any connected
peripherals.
2. Remove the two screws (1) and lift HDD clamp free
3. Slide the HDD in the direction indicated by the arrow (2).