Sceptre s6500 Guia Do Utilizador
Notebook User’s Guide
88
Installing the Combo Module and Optional Modules
For step by step information on installing any one of the modules into Bay 2 of
the Notebook, please refer to the following:
the Notebook, please refer to the following:
1. Ensure that the Notebook is in the power-off mode before installing a
module. Failure to do so may cause damage to the electronics of your
Notebook computer or to the module.
Notebook computer or to the module.
Figure 6-3: Installing the Combo Module into Bay 2
2. Locate Bay 2 on the Notebook. Remove the module from the Notebook’s
bay. Refer to instructions above on Removing Modules.
3. When the module has been properly seated, you should hear it click into
place. The release latch is spring-loaded and will snap back into place.
4. Turn the Notebook on. The Notebook will automatically recognize the
presence of the module that was just inserted.