Yamaha PF-1000 Manual Do Proprietário
Making Global and Other Important Settings — Function
139
PF-1000
Copying and Formatting Disks — Disk
• Copying cannot be done
between a 2DD disk and
2HD disk. When copying,
make sure both disk are
the same type.
2HD disk. When copying,
make sure both disk are
the same type.
• Depending on the amount
of data contained in the
original source disk, you
may have to swap the two
disks several times until all
of the data is properly
copied.
original source disk, you
may have to swap the two
disks several times until all
of the data is properly
copied.
• Make sure to read the
J
I
H
G
F
2
3
1
5
6
7
8
4
Turns the Song Auto Open function on
or off. When this is set to “ON,” the PF-
1000 automatically calls up the first disk
song when a disk is inserted.
or off. When this is set to “ON,” the PF-
1000 automatically calls up the first disk
song when a disk is inserted.
This function copies all the data
from one disk to another, letting
you back up all your important
data before editing. For
instructions, see “Copying from
Disk to Disk” below.
from one disk to another, letting
you back up all your important
data before editing. For
instructions, see “Copying from
Disk to Disk” below.
This function formats a floppy
disk (see below).
disk (see below).
Source
disk
Copy
Copy
Destination
disk
Internal memory
Copying from Disk to Disk
As shown below, first copy the data of the original (source) disk to the PF-1000, then
copy the data to the backup (destination) disk.
As shown below, first copy the data of the original (source) disk to the PF-1000, then
copy the data to the backup (destination) disk.
1
Press the [F] button. A message
appears, prompting you to insert
the source disk.
appears, prompting you to insert
the source disk.
2
Insert the disk containing the
original data into the drive and
press “OK.”
A “Now copying” message
appears, and the PF-1000
begins copying data to internal
memory. To abort the operation,
press “CANCEL.”
original data into the drive and
press “OK.”
A “Now copying” message
appears, and the PF-1000
begins copying data to internal
memory. To abort the operation,
press “CANCEL.”
3
At the “Please insert a destination
disk and press the OK button ”
prompt, eject the source disk and
replace it with a blank, formatted
disk, then press “OK.” To abort the
operation, press “CANCEL.”
disk and press the OK button ”
prompt, eject the source disk and
replace it with a blank, formatted
disk, then press “OK.” To abort the
operation, press “CANCEL.”
4
When the operation is finished
(or when prompted), eject the
destination disk.
(or when prompted), eject the
destination disk.
Commercially available
music data is subject to
protection by copyright
laws. Copying commer-
cially available data is
strictly prohibited,
except for your own per-
sonal use. Some music
software is purposely
copy-protected and
cannot be copied.
music data is subject to
protection by copyright
laws. Copying commer-
cially available data is
strictly prohibited,
except for your own per-
sonal use. Some music
software is purposely
copy-protected and
cannot be copied.
Formatting a Disk
When using an unformatted disk for
the first time, make sure to properly
format it on the PF-1000. This
includes blank disks as well as disks
already initialized in a different
format. Formatting erases all data on
the disk.
the first time, make sure to properly
format it on the PF-1000. This
includes blank disks as well as disks
already initialized in a different
format. Formatting erases all data on
the disk.
Insert the disk with shutter facing
away from you and the label side
up. To start the Format operation,
press the [H] (DISK FORMAT)
button, in the DISK page above.
away from you and the label side
up. To start the Format operation,
press the [H] (DISK FORMAT)
button, in the DISK page above.
The Format operation initial-
izes a disk with a specific file
system, allowing the corre-
sponding device (in this case,
the PF-1000) to access it
properly.
Since there are several types
of formats and disks avail-
able, you should know which
ones to use with the PF-
1000. 2DD disks are format-
ted to a capacity of 720 KB,
and 2HD disks are formatted
to a capacity of 1.44 MB.
izes a disk with a specific file
system, allowing the corre-
sponding device (in this case,
the PF-1000) to access it
properly.
Since there are several types
of formats and disks avail-
able, you should know which
ones to use with the PF-
1000. 2DD disks are format-
ted to a capacity of 720 KB,
and 2HD disks are formatted
to a capacity of 1.44 MB.
Formatting a disk completely
erases all data on the disk.
Make sure that the disk
you’re formatting does not
contain important data!
erases all data on the disk.
Make sure that the disk
you’re formatting does not
contain important data!
CAUTION
Disk Lamp
When the power is turned on, the disk lamp
(at the bottom left of the drive) lights to
indicate the drive can be used.
When the power is turned on, the disk lamp
(at the bottom left of the drive) lights to
indicate the drive can be used.