Yamaha PF-1000 Manual Do Proprietário
141
PF-1000
Using Your PF-1000 with Other Devices
1 Using the Headphones
(PHONES jacks).
To use headphones, connect them to one of the PHONES
jacks (standard 1/4" phone jacks) located on the left side
of the keyboard. You can also determine whether or not
the internal stereo speaker system is shut off when a pair
of headphones is plugged into the PHONES jack
(page 138). Two people can enjoy listening to the PF-
1000 together by connecting two pairs of headphones to
the two jacks.
jacks (standard 1/4" phone jacks) located on the left side
of the keyboard. You can also determine whether or not
the internal stereo speaker system is shut off when a pair
of headphones is plugged into the PHONES jack
(page 138). Two people can enjoy listening to the PF-
1000 together by connecting two pairs of headphones to
the two jacks.
2 Connecting the Microphone
or Guitar (MIC/LINE IN jack).
By connecting a microphone to the PF-1000, you can
enjoy singing along with your own performance or song
playback. (A dynamic microphone is recommended.) The
PF-1000 outputs your vocals or guitar sounds through the
built-in speakers.
enjoy singing along with your own performance or song
playback. (A dynamic microphone is recommended.) The
PF-1000 outputs your vocals or guitar sounds through the
built-in speakers.
1
Connect your microphone to the MIC/LINE IN jack
(standard 1/4" phone jack).
(standard 1/4" phone jack).
2
Set the [MIC LINE] switch (located next to the [MIC/
LINE IN] jack) to the MIC position.
LINE IN] jack) to the MIC position.
3
Use the [INPUT VOLUME] knob (located next to the
MIC/LINE IN jack) to set the microphone volume.
MIC/LINE IN jack) to set the microphone volume.
Before connecting the PF-1000 to other electronic components,
turn off the power to all the components. Before turning the power
on or off to all components, set all volume levels to minimum (0).
Otherwise, electrical shock or damage to the components may
occur.
turn off the power to all the components. Before turning the power
on or off to all components, set all volume levels to minimum (0).
Otherwise, electrical shock or damage to the components may
occur.
CAUTION
PEDAL
AUX PEDAL
AC INLET
VIDEO OUT
AUX IN
MIDI
TO HOST
HOST SELECT
IN
R
L/L+R
R
L
R
L/L+R
THRU
ON
OFF
MIDI PC-2
Mac
PC-1
OUT
AUX OUT
PHONES
POWER
LEVEL FIXED
MIN
MAX
INPUT
VOLUME MIC/LINE IN
MIC LINE
1
3
4
6
8
7
5
2
Use an unidirectional microphone for best results.
MIC LINE
MIC LINE
When connecting a microphone
When connecting a guitar
You should set the [MIC LINE] switch to the LINE position when
connecting an audio source with line-level output to the MIC/LINE
IN jack.
connecting an audio source with line-level output to the MIC/LINE
IN jack.
MIN
MAX
INPUT
VOLUME