Zhone 5100 Guia Da Instalação
CHAPTER 3
Port connections
Port connections
30
Vpacket 5100/6100 Series Installer’s Guide
Figure 3-9 shows an example of connecting a 5100/6100 VDR to a PC.
Figure 3-9. Connecting to a PC
LEDs
Once the 5100/6100 VDR is powered on, the LEDs activate. Table 3-2 lists the front panel LED
status and management functions
Each WAN port has a status LED to the immediate left of the port on the back panel. The single
LAN port has individual LEDs to indicate link status and activity. The FXS and digital T1 voice
ports have a status LED to the immediate right of the port.
9-pin to 9-pin
serial cable
6100 VDR
9-pin to 25-pin adapter
(if needed to connect to a
25-pin connector on the PC)
Table 3-2. Front panel LEDs and their meanings
LED
Status
Color
Function
Power
Lit
Green
Normal condition. Unit is receiving power.
Darkened
—
Unit is not receiving power.
Status
Lit
Green
Normal operation.
Blinking
Yellow
An error or fault condition exists.
Alarm
Darkened
—
Normal condition.
Blinking
Yellow
An error or fault condition exists.