Zhone 1813 Guia Do Utilizador

COMMAND DESCRIPTION 

interface 

The name of the WAN interface. Typically this is ‘atm0’. 

enable 

This enables this IPoA interface. 

disable 

This disables this IPoA interface. 

<vpi> <vci> 

These are the vpi and vci values on which ipoa has to be enabled/disabled. Vpi and vci are 
assigned with the vcadd command. The showatmconn command can also be used to list the 
current ATM connections with their respective vpi and vci values. (Note the vcadd and 
showatmconn commands are located in the “atm” directory). 

encapsulation  

This specifies the encapsulation type. The possible values are ‘llc’ or ‘vc’ which represent 
Logical Link Control or VC multiplexing respectively. 

default 

If an entry does not exist for the destination in the inverse ATM Arp table, then the packet is 
forwarded on the PVC specified. 

ipaddress 

This specifies the next hop IP address of the peer-end. 

OUI vpnId 

This specifies the VPN encapsulation. The OUI (Organizationally Unique Identifier) and VPN 
identifier are specified as numbers. 

 

EXAMPLE 

This command establishes an IPoA connection on the WAN interface atm0. VPI, VCI values 0, 
100 is used for the ATM connection. LLC encapsulation will be used. 

This command disables the IPoA connection. 

 

109