Zhone 1813 Guia Do Utilizador

This command configures the specified WAN interface to use 1483MER (MAC Encapsulation 
Routing). The “mer” command is used to enable the configuration. 

 

COMMAND DESCRIPTION 

port 

The MER interface name (mer0). 

Vpi vci  

These are the vpi, vci values on which the 1483 is configured. vpi,vci are assigned with the 
vcadd command. The showatmconn command can also be used to list the current ATM 
connections with their respective vpi and vci values. (Note the vcadd and showatmconn com-
mands are located in the “atm” directory). The vpi value is between 0 - 255. The vci value is 

between 0 - 65535. 

encapsulation 

This specifies the encapsulation type. The possible values are ‘llc’ or ‘vc’ which represent 
Logical Link Control or VC multiplexing respectively. 

 

This enables, disables, deletes or gives status of the 1483MER configurations. 

 

The relay command configures and enables PPPoE relay. 

COMMAND DESCRIPTION 

-client <-if interface> <-pvc vpi vci> 

This specifies the server interface for the PPPoE Relay. The PPPoE server is connected to this 
interface. The interface may be ppp0, ppp1, ppp2, ppp3, ppp4, ppp5, ppp6, or ppp7. 

-server <-if interface> <-pvc vpi vci> 

This specifies the client interface for the PPPoE Relay. The PPPoE clients are connected to this 
interface. Typically eth0 is specified. 

111