ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

Chapter 30 Firmware and Configuration File Maintenance

288

Figure 158   Telnet in Menu 24.5

1 Launch the FTP client on your computer.

2 Enter “open”, followed by a space and the IP address of your Prestige.  

3 Press [ENTER] when prompted for a username.

4 Enter your password as requested (the default is “1234”).

5 Enter “bin” to set transfer mode to binary.

6 Use “get” to transfer files from the Prestige to the computer, for example, “get rom-0 

config.rom” transfers the configuration file on the Prestige to your computer and renames 
it “config.rom”. See earlier in this chapter for more information on filename conventions.

7 Enter “quit” to exit the ftp prompt. 

Menu 24.5 - System Maintenance - Backup Configuration
To transfer the configuration file to your workstation, follow the procedure
below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your Prestige. Then type "root" and
   SMT password as requested.
3. Locate the 'rom-0' file.
4. Type 'get rom-0' to back up the current Prestige configuration to
   your workstation.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in this menu to back up using TFTP), please see your Prestige manual.
Press ENTER to Exit: