ZyXEL NBG-318S Guia Do Utilizador
Chapter 15 Bandwidth Management
NBG-318S User’s Guide
155
The following table describes the labels in this screen.
Table 60 Management > Bandwidth MGMT > General
LABEL
DESCRIPTION
Enable Bandwidth
Management
Select this check box to have the NBG-318S apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
Enable Automatic
Traffic Classifier
This field is only applicable when you select the Enable Bandwidth
Management check box.
Select this check box to have the NBG-318S base on the default bandwidth
Select this check box to have the NBG-318S base on the default bandwidth
classes to apply bandwidth management. Real-time packets, such as VoIP
traffic always get higher priority.
Apply
Click Apply to save your customized settings.
Reset
Click Reset to begin configuring this screen afresh.
15.9 Bandwidth Management Advanced Configuration
Click Management > Bandwidth MGMT > Advanced to open the bandwidth management
Advanced screen.
Advanced screen.
Figure 80 Management > Bandwidth MGMT > Advanced