ZyXEL NBG-318S Guia Do Utilizador

 Chapter 15 Bandwidth Management

NBG-318S User’s Guide

Figure 81   Management > Bandwidth MGMT > Advanced: Rule Configuration 

The following table describes the labels in this screen.

Table 62   Management > Bandwidth MGMT > Advanced: Application Rule Configuration

#

This is the number of an individual bandwidth management rule.

Enable

Select an interface’s check box to enable bandwidth management on that 

interface. 

Direction 

These read-only labels represent the physical interfaces. Bandwidth 

management applies to all traffic flowing out of the router through the interface, 

regardless of the traffic’s source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the 

NBG-318S and be managed by bandwidth management.

Bandwidth

Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum 

or minimum bandwidth allowed for the rule in kilobits per second. 

Destination Port

This is the port number of the destination. See 

 for some 

common services and port numbers.

Source Port

This is the port number of the source. See 

 for some 

common services and port numbers.

Protocol

This is the protocol (TCP or UDP) used for the service.

OK

Click OK to save your customized settings.

Cancel

Click Cancel to exit this screen without saving.

In addition to the pre-defined services, if you want to edit a bandwidth management rule for 
other applications and/or subnets, click the Edit icon in the User-defined Service table of the 
Advanced screen. The following screen displays.