ZyXEL xgs-4528f Guia Do Utilizador

Chapter 24 Multicast

XGS-4528F User’s Guide

Multicast VLAN 
ID

Enter the VLAN ID (1 to 4094) of the multicast VLAN.  

802.1p Priority Select a priority level (0-7) with which the Switch replaces the priority in 

outgoing IGMP control packets (belonging to this multicast VLAN). 

Mode

Specify the MVR mode on the Switch. Choices are Dynamic and 
Compatible. 

Select Dynamic to send IGMP reports to all MVR source ports in the 
multicast VLAN. 

Select Compatible to set the Switch not to send IGMP reports. 

Port

This field displays the port number on the Switch. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all 
ports. Use this row first to set the common settings and then make 
adjustments on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Source Port

Select this option to set this port as the MVR source port that sends and 
receives multicast traffic. All source ports must belong to a single 
multicast VLAN. 

Receiver Port

Select this option to set this port as a receiver port that only receives 
multicast traffic.  

None

Select this option to set the port not to participate in MVR. No MVR 
multicast traffic is sent or received on this port. 

Tagging

Select this checkbox if you want the port to tag the VLAN ID in all 
outgoing frames transmitted. 

Add

Click Add to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

VLAN

This field displays the multicast VLAN ID. 

Active

This field displays whether the multicast group is enabled or not. 

Name

This field displays the descriptive name for this setting. 

Mode

This field displays the MVR mode. 

Source Port

This field displays the source port number(s). 

Receiver Port

This field displays the receiver port number(s). 

802.1p

This field displays the priority level.

Delete

To delete a multicast VLAN(s), select the rule(s) that you want to 
remove in the Delete column, then click the Delete button. 

Cancel

Click Cancel to clear the Delete check boxes.

Table 65   Advanced Application > Multicast > Multicast Setting > MVR  (continued)