ZyXEL P-663H-51 Guia Do Utilizador
Chapter 7 Network Address Translation (NAT) Screens
P-663H-51 User’s Guide
74
7.2.2 Virtual Servers Example
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), port 80 to another (B in the example) and assign a default server IP address of
192.168.1.35 to a third (C in the example). You assign the LAN IP addresses and the ISP
assigns the WAN IP address. The NAT network appears as a single host on the Internet.
example), port 80 to another (B in the example) and assign a default server IP address of
192.168.1.35 to a third (C in the example). You assign the LAN IP addresses and the ISP
assigns the WAN IP address. The NAT network appears as a single host on the Internet.
Figure 33 Multiple Servers Behind NAT Example
7.3 Configuring Virtual Servers
"
The NAT screens are available only when you enable NAT in the WAN
configuration.
configuration.
Click Advanced Setup > NAT > Virtual Servers to open the following screen.
Figure 34 Advanced Setup > NAT > Virtual Servers