ZyXEL NSA-2400 Guia Do Utilizador
Chapter 9 Troubleshooting
NSA-2400 User’s Guide
131
• Turn the NSA-2400 off, remove the disk tray and make sure:
• it is a SATA-1 compatible hard drive
• it is inserted correctly into the disk tray. Push the tray back into NSA disk bay until it
snaps into place and push the latch up (see the NSA Quick Start Guide).
• the hard disk is not faulty. You could either try a different hard disk or test the original
hard disk in a different NSA or computer.
• If the problem continues, contact the vendor.
V
The disk drive ALM LED is on.
• The hard disk has a problem. What you have to do is turn the NSA-2400 off and replace
the faulty disk. See your Quick Start Guide for information on replacing a disk and also
. After replacing the disk, turn on the NSA-2400, go to the
Storage > Disk screen and click the Repair icon next to the new disk. If there is already
another volume resynchronizing, then you will see Waiting Resync as the volume status.
another volume resynchronizing, then you will see Waiting Resync as the volume status.
• If the problem continues, contact the vendor.
V
The LAN LED is off.
• Make sure the Ethernet cable is connected properly to the NSA-2400 and connected to
another (Ethernet) device. Make sure the other device is turned on. If it’s connected
directly to a computer, make sure that the computer network card is working (ping
127.0.0.1 on the computer).
directly to a computer, make sure that the computer network card is working (ping
127.0.0.1 on the computer).
• Use another Ethernet cable. If you’re connecting to a Gigabit Ethernet, make sure you’re
using an 8-wire Ethernet cable.
• If the problem continues, contact the vendor.
See
for a description of NSA-2400 LEDs.
9.3 NSA-2400 Login and Access
V
I forgot the IP address for the NSA-2400.
• The default IP address is 192.168.1.3.
• Use the NDU (NSA Discovery Utility) to discover your NSA-2400. If you have admin
privileges, you can directly change the IP address of the NSA-2400 using the NDU.