ZyXEL nbg-4615 Guia Do Utilizador
Chapter 12 WISP Mode
NBG4615 User’s Guide
108
12.5.3 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to
Configuration > Site Survey to open the following screen.
Configuration > Site Survey to open the following screen.
Figure 71 Configuration > Wireless LAN > Site Survey (WISP)
The following table describes the labels in this screen.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type the pre-shared key employed by the access point to which you
want to connect.
want to connect.
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to reload the previous configuration for this screen.
Table 39 WPA-PSK/WPA2-PSK (WISP) (continued)
LABEL
DESCRIPTION
Table 40 Configuration > Wireless LAN > Site Survey (WISP)
LABEL
DESCRIPTION
Station Site Survey
#
#
Select a wireless device and click Add Profile to open a configuration
screen where you can add the selected wireless device to a profile and
then enable it.
screen where you can add the selected wireless device to a profile and
then enable it.
SSID
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the
NBG4615 is connecting to it.
NBG4615 is connecting to it.
BSSID
This displays the MAC address of the wireless device.
Signal
Strength
Strength
This displays the strength of the wireless signal. The signal strength
mainly depends on the antenna output power and the distance between
your NBG4615 and this device.
mainly depends on the antenna output power and the distance between
your NBG4615 and this device.
Channel
This displays the channel number used by this wireless device.
station
encryp
encryp
This displays the data encryption method used by this wireless device.
station auth
This displays the authentication method used by this wireless device.