ZyXEL nbg-4615 Guia Do Utilizador
Chapter 14 Wireless LAN
NBG4615 User’s Guide
139
14.4 MAC Filter
The MAC filter screen allows you to configure the NBG4615 to give exclusive
access to devices (Allow) or exclude devices from accessing the NBG4615 (Deny).
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address
of the devices to configure this screen.
access to devices (Allow) or exclude devices from accessing the NBG4615 (Deny).
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address
of the devices to configure this screen.
To change your NBG4615’s MAC filter settings, click Network > Wireless LAN >
MAC Filter. The screen appears as shown.
MAC Filter. The screen appears as shown.
Figure 79 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer
Update Timer
The Group Key Update Timer is the rate at which the AP sends a new
group key out to all clients.
group key out to all clients.
The default is 3600 seconds (60 minutes).
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to reload the previous configuration for this screen.
Table 45 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK (continued)
LABEL
DESCRIPTION
Table 46 Network > Wireless LAN > MAC Filter
LABEL
DESCRIPTION
Access Policy
SSID
SSID
Select the SSID for which you want to configure MAC filtering.