ZyXEL nbg-4615 Betriebsanweisung

 Chapter 14 Wireless LAN

NBG4615 User’s Guide

The MAC filter screen allows you to configure the NBG4615 to give exclusive 
access to devices (Allow) or exclude devices from accessing the NBG4615 (Deny). 
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC 
address is assigned at the factory and consists of six pairs of hexadecimal 
characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address 
of the devices to configure this screen.

To change your NBG4615’s MAC filter settings, click Network > Wireless LAN > 
MAC Filter. The screen appears as shown.

Figure 79   Network > Wireless LAN > MAC Filter

The following table describes the labels in this menu.

Pre-Shared Key  WPA-PSK/WPA2-PSK uses a simple common password for 

authentication.

Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.

Group Key 
Update Timer

The Group Key Update Timer is the rate at which the AP sends a new 
group key out to all clients. 

The default is 3600 seconds (60 minutes).

Apply

Click Apply to save your changes back to the NBG4615.

Cancel

Click Cancel to reload the previous configuration for this screen.

Table 45   Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK (continued)

Table 46   Network > Wireless LAN > MAC Filter

Access Policy
SSID

Select the SSID for which you want to configure MAC filtering.