ZyXEL p-2802h-i1 Manual Do Utilizador

 Chapter 8 Wireless LAN

P-2802H(W)(L)-I Series User’s Guide

Figure 49   Wireless LAN > General 

The following table describes the labels in this screen.

Select No Security to allow wireless stations to communicate with the access points without 
any data encryption. 

Table 30   Wireless LAN > General

Active Wireless 

LAN

Click the check box to activate wireless LAN.

Network Name 

(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Note: If you are configuring the ZyXEL Device from a computer 

connected to the wireless LAN and you change the ZyXEL 
Device’s SSID or WEP settings, you will lose your wireless 
connection when you press Apply to confirm. You must then 
change the wireless settings of your computer to match the 
ZyXEL Device’s new settings.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through scanning using a site survey tool.

Channel 

Selection

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box. 

Scan

Click this button to have the ZyXEL Device automatically scan for and select a 

channel which is not used by another device.

Security Mode

See the following sections for more details about this field.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to reload the previous configuration for this screen.

Advanced 

Setup

Click Advanced Setup to display the Wireless Advanced Setup screen and edit 

more details of your WLAN setup.