ZyXEL p-2802h-i1 Manual Do Utilizador

 Chapter 8 Wireless LAN

P-2802H(W)(L)-I Series User’s Guide

Figure 51   Wireless: Static WEP Encryption

The following table describes the wireless LAN security labels in this screen.

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless 
LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security 
Mode list.

Table 32   Wireless: Static WEP Encryption

Security Mode

Choose Static WEP from the drop-down list box.

Passphrase

Enter a Passphrase (up to 32 printable characters) and click Generate. The ZyXEL 

Device automatically generates a WEP key.

WEP Key

The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless 

stations must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII 

string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or 

256-bit WEP key respectively.