ZyXEL p-2802h-i1 Manual Do Utilizador
Chapter 3 Internet and Wireless Setup Wizard
P-2802H(W)(L)-I Series User’s Guide
57
Figure 15 Internet Connection with Ethernet
The following table describes the fields in this screen.
5 Wait for the ZyXEL Device to finish testing your WAN connection.
Table 8 Internet Connection with Ethernet
LABEL
DESCRIPTION
Obtain an IP
Address
Automatically
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address.
Static IP
Address
Select Static IP Address if your ISP gave you an IP address to use.
IP Address
Enter your ISP assigned IP address.
Subnet Mask
Enter a subnet mask in dotted decimal notation.
Refer to the appendix to calculate a subnet mask If you are implementing subnetting.
Refer to the appendix to calculate a subnet mask If you are implementing subnetting.
Gateway IP
address
You must specify a gateway IP address (supplied by your ISP) when you use Ethernet
in the Encapsulation field in the previous screen.
First DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
Second DNS
Server
As above.
Back
Click Back to go back to the previous wizard screen.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Exit
Click Exit to close the wizard screen without saving your changes.