ZyXEL p-334wh Guia Do Utilizador

Página de 289
P-334WH User’s Guide
114 
Chapter 8 LAN
8.2.2  IP Address and Subnet Mask
Refer to the IP address and subnet mask section in the Connection Wizard chapter for this 
information.
8.2.3  Multicast
Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 
recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to 
a group of hosts on the network - not everybody and not just 1. 
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish 
membership in a Multicast group - it is not used to carry user data. IGMP version 2 (RFC 
2236) is an improvement over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If 
you would like to read more detailed information about interoperability between IGMP 
version 2 and version 1, please see sections 4 and 5 of RFC 2236. The class D IP address is 
used to identify host groups and can be in the range 224.0.0.0 to 239.255.255.255. The address 
224.0.0.0 is not assigned to any group and is used by IP multicast computers. The address 
224.0.0.1 is used for query messages and is assigned to the permanent group of all IP hosts 
(including gateways). All hosts must join the 224.0.0.1 group in order to participate in IGMP. 
The address 224.0.0.2 is assigned to the multicast routers group. 
The ZyXEL Device supports both IGMP version 1 (IGMP-v1) and IGMP version 2 (IGMP-
v2
). At start up, the ZyXEL Device queries all directly connected networks to gather group 
membership. After that, the ZyXEL Device periodically updates this information. IP 
multicasting can be enabled/disabled on the ZyXEL Device LAN and/or WAN interfaces in 
the web configurator (LAN; WAN). Select None to disable IP multicasting on these 
interfaces.
8.3  LAN IP Screen
Click Network > LAN to open the IP screen.
Figure 62   LAN IP