ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 8 LAN

115

The following table describes the labels in this screen.

Table 43   LAN IP

LAN TCP/IP

IP Address

Type the IP address of your ZyXEL Device in dotted decimal notation 192.168.1.1 

(factory default).

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your 

ZyXEL Device will automatically calculate the subnet mask based on the IP 

address that you assign. Unless you are implementing subnetting, use the subnet 

mask computed by the ZyXEL Device 255.255.255.0.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to begin configuring this screen afresh.

IP alias allows you to partition a physical network into different logical networks over the 
same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its 
single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN 
network.

To change your ZyXEL Device’s IP alias settings, click Network > LAN > IP Alias. The 
screen appears as shown.

Figure 63   LAN IP Alias