ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

160 

Chapter 15 Bandwidth Management

To edit a bandwidth management rule for the pre-defined service in the ZyXEL Device, click 
the Edit icon in the Application List table of the Advanced screen. The following screen 
displays.

Figure 86   Bandwidth Management Rule Configuration: Pre-defined Service

The following table describes the labels in this screen.

Table 66   Bandwidth Management Rule Configuration: Pre-defined Service

#

This is the number of an individual bandwidth management rule.

Enable

Select an interface’s check box to enable bandwidth management on that 

interface. 

Direction 

These read-only labels represent the physical interfaces. Bandwidth management 

applies to all traffic flowing out of the router through the interface, regardless of 

the traffic’s source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the 

ZyXEL Device and be managed by bandwidth management.

Bandwidth

Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum 

or minimum bandwidth allowed for the rule in kilobits per second. 

Destination Port

This is the port number of the destination. See 

 for some 

common services and port numbers.

Source Port

This is the port number of the source. See 

 for some 

common services and port numbers.

Protocol

This is the protocol (TCP or UDP) used for the service.

OK

Click OK to save your customized settings.

Cancel

Click Cancel to exit this screen without saving.