ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 15 Bandwidth Management

161

In addition to the pre-defined services, if you want to edit a bandwidth management rule for 
other applications and/or subnets, click the Edit icon in the User-defined Service table of the 
Advanced screen. The following screen displays.

Figure 87   Bandwidth Management Rule Configuration: User-defined Service

The following table describes the labels in this screen.

Table 67   Bandwidth Management Rule Configuration: User-defined Service

BW Budget

Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum 

or minimum bandwidth allowed for the rule in kilobits per second. 

Destination 

Address

Enter the destination IP address in dotted decimal notation.

Destination 

Subnet Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a 

Destination Address. Refer to the appendices for more information on IP 

subnetting.

Destination Port

Enter the port number of the destination. See 

 for some 

common services and port numbers.

Source Address

Enter the source IP address in dotted decimal notation.

Source Subnet 

Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a Source 

Address. Refer to the appendices for more information on IP subnetting.

Source Port

Enter the port number of the source. See 

 for some common 

services and port numbers.

Protocol

Select the protocol (TCP or UDP) or select User defined and enter the protocol 

(service type) number. 

OK

Click OK to save your customized settings.

Cancel

Click Cancel to exit this screen without saving.