ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

164 

Chapter 16 Remote Management Screens

3 There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

4 There is a firewall rule that blocks it.

When NAT is enabled:

• Use the ZyXEL Device’s WAN IP address when configuring from the WAN. 
• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.

There is a default system management idle timeout of five minutes (three hundred seconds). 
The ZyXEL Device automatically logs you out if the management session remains idle for 
longer than this timeout period. The management session does not time out when a statistics 
screen is polling. You can change the timeout period in the System screen

To change your ZyXEL Device’s World Wide Web settings, click Management > Remote 
MGMT to display the WWW screen.

Figure 89   WWW Remote Management

The following table describes the labels in this screen.

Table 68   WWW Remote Management

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.