ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 16 Remote Management Screens

163

This chapter provides information on the Remote Management screens. 

Remote management allows you to determine which services/protocols can access which 
ZyXEL Device interface (if any) from which computers.

Note: When you configure remote management to allow management from the WAN, 

you still need to configure a firewall rule to allow access. See the firewall 
chapters for details on configuring firewall rules.

You may manage your ZyXEL Device from a remote location via:

•

Internet (WAN only)

•

ALL (LAN and WAN)

•

LAN only

•

Neither (Disable).

Note: When you choose WAN or LAN & WAN, you still need to configure a firewall 

rule to allow access.

To disable remote management of a service, select Disable in the corresponding Server 
Access field.

You may only have one remote management session running at a time. The ZyXEL Device 
automatically disconnects a remote management session of lower priority when another 
remote management session of higher priority starts. The priorities for the different types of 
remote management sessions are as follows.

1 Telnet

2 HTTP

Remote management over LAN or WAN will not work when:

1 You have disabled that service in one of the remote management screens.

2 The IP address in the Secured Client IP Address field does not match the client IP 

address. If it does not match, the ZyXEL Device will disconnect the session 
immediately.