ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

270 

Appendix J Internal SPTGEN

Each parameter you enter must be preceded by one “=”sign and one space.

Some parameters are dependent on others. For example, if you disable the Configured field in 
menu 1 (see 

), then you disable every field in this menu.

If you enter a parameter that is invalid in the Input column, the ZyXEL Device will not save 
the configuration and the command line will display the Field Identification Number. 

, shown next, is an example of what the ZyXEL Device displays if you enter a 

value other than “0” or “1” in the Input column of Field Identification Number 1000000 
(refer to 

Figure 152   Invalid Parameter Entered: Command Line Example

field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2

The ZyXEL Device will display the following if you enter parameter(s) that are valid.

Figure 153   Valid Parameter Entered: Command Line Example

Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2

1 Launch your FTP application.

2 Enter "

bin

". The command “

bin

” sets the transfer mode to binary.

3 Get "

rom-t

" file. The command “

get

” transfers files from the ZyXEL Device to your 

computer. The name “

rom-t

” is the configuration filename on the ZyXEL Device.

4 Edit the "

rom-t

" file using a text editor (do not use a word processor). You must leave 

this FTP screen to edit.