ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 3 Connection Wizard

65

1 The ISP tells you the DNS server addresses, usually in the form of an information sheet, 

when you sign up. If your ISP gives you DNS server addresses, enter them in the DNS 
Server fields in the Wizard and/or WAN > Internet Connection screen.

2 If the ISP did not give you DNS server information, leave the DNS Server fields set to 

0.0.0.0 in the Wizard screen and/or set to From ISP in the WAN > Internet Connection 
screen for the ISP to dynamically assign the DNS server IP addresses.

The following wizard screen allows you to assign a fixed WAN IP address and DNS server 
addresses. 

Figure 26   Wizard Step 3: WAN IP and DNS Server Addresses

The following table describes the labels in this screen

Table 22   Wizard Step 3: WAN IP and DNS Server Addresses

WAN IP Address Assignment 

My WAN IP Address

Enter your WAN IP address in this field. The WAN IP address should be in 

the same subnet as your DSL/Cable modem or router.

My WAN IP Subnet Mask

Enter the IP subnet mask in this field.

Gateway IP Address 

Enter the gateway IP address in this field. 

System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice 

versa. The DNS server is extremely important because without it, you must know the IP address of a 

computer before you can access it. The ZyXEL Device uses a system DNS server (in the order you 

specify here) to resolve domain names for DDNS and the time server.