ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 3 Connection Wizard

67

The following table describes the fields in this screen.

Table 24   Wizard Step 3: WAN MAC Address

Factory Default

Select Factory Default to use the factory assigned default MAC address.

Clone the 

computer’s MAC 

address

Select this option and enter the IP address of the computer on the LAN whose 

MAC you are cloning. It is advisable to clone the MAC address from a computer 

on your LAN even if your ISP does not presently require MAC address 

authentication. 

Set WAN MAC 

Address

Select this option and enter the MAC address you want to use.

Back

Click Back to return to the previous screen.

Next

Click Next to continue. 

Exit

Click Exit to close the wizard screen without saving.

Bandwidth management allows you to control the amount of bandwidth going out through the 
ZyXEL Device’s WAN, LAN or WLAN port and prioritize the distribution of the bandwidth 
according to the traffic type. This helps keep one service from using all of the available 
bandwidth and shutting out other users.

Figure 28   Wizard Step 4: Bandwidth Management 

The following fields describe the label in this screen.

Table 25   Wizard Step 4: Bandwidth Management

Enable BM for all traffic 

automatically

Select the check box to have the ZyXEL Device apply bandwidth 

management to traffic going out through the ZyXEL Device’s WAN, LAN or 

WLAN port. Bandwidth is allocated according to the traffic type 

automatically. Real-time packets, such as VoIP traffic always get higher 

priority.

Back

Click Back to return to the previous screen.