ZyXEL NBG-419N Guia Do Utilizador
Chapter 11 Wireless LAN
NBG-419N User’s Guide
108
11.4.3 WPA-PSK/WPA2-PSK
Click Network > Wireless LAN to display the General screen. Select WPA-PSK
or WPA2-PSK from the Security Mode list.
or WPA2-PSK from the Security Mode list.
Figure 70 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Refer to
for descriptions of the other labels in this screen.
Table 39 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA-PSK
Compatible
Compatible
This field appears when you choose WPA-PSK2 as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security
mode to connect to your NBG-419N.
mode to connect to your NBG-419N.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer
Update Timer
The Group Key Update Timer is the rate at which the AP sends a new
group key out to all clients.
group key out to all clients.
The default is 3600 seconds (60 minutes).
Apply
Click Apply to save your changes back to the NBG-419N.
Reset
Click Reset to reload the previous configuration for this screen.