ZyXEL NBG-419N Guia Do Utilizador
NBG-419N User’s Guide
139
C
H A P T E R
14
DHCP Server
14.1 Overview
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the NBG-419N’s LAN as a DHCP server or disable it. When configured as
a server, the NBG-419N provides the TCP/IP configuration for the clients. If DHCP
service is disabled, you must have another DHCP server on your LAN, or else the
computer must be manually configured.
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the NBG-419N’s LAN as a DHCP server or disable it. When configured as
a server, the NBG-419N provides the TCP/IP configuration for the clients. If DHCP
service is disabled, you must have another DHCP server on your LAN, or else the
computer must be manually configured.
14.2 What You Can Do
• Use the General (
) screen to enable the DHCP server.
• Use the Advanced (
) screen to assign IP addresses on
the LAN to specific individual computers based on their MAC Addresses.
14.3 General Screen
Use this screen to enable the DHCP server. Click Network > DHCP Server. The
following screen displays.
following screen displays.
Figure 90 Network > DHCP Server > General