ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 6 WAN

115

Figure 56   Network > WAN > Traffic Redirect

Each field is described in the following table.

Table 47   Network > WAN > Traffic Redirect

Active

Select this to set up a backup gateway in case the default gateway is not available. 
(For example, this might happen if the Internet connection goes down.) Clear this if 
you do not have a backup gateway.

Backup Gateway 
IP Address

Enter the IP address of the backup gateway. The ZyXEL Device automatically 
uses this gateway if the default gateway is not available anymore.

Check WAN IP 
Address

Enter the IP address of a reliable nearby computer the ZyXEL Device uses to test 
whether or not the default gateway is available anymore. For example, use one of 
your ISP’s DNS server addresses.

If you enter 0.0.0.0, the test fails each time.

Fail Tolerance

Enter the number of consecutive times the ZyXEL Device may attempt and fail to 
find the reliable nearby computer at Check WAN IP Address before it starts using 
the backup gateway. 2 - 5 are typical choices.

Period (sec)

Enter the number of seconds between attempts to find the reliable nearby 
computer at Check WAN IP Address. 5 - 60 are typical choices.

Timeout (sec)

Enter the number of seconds the ZyXEL Device waits for a response from the 
reliable nearby computer at Check WAN IP Address before the attempt is a 
failure. 3 - 50 are typical choices, but this number should be less than the Period.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.