ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

312

Appendix E Internal SPTGEN

Each parameter you enter must be preceded by one “=”sign and one space.

Some parameters are dependent on others. For example, if you disable the Configured field in 
menu 1 (see 

), then you disable every field in this menu.

If you enter a parameter that is invalid in the Input column, the ZyXEL Device will not save 
the configuration and the command line will display the Field Identification Number. 

, shown next, is an example of what the ZyXEL Device displays if you enter a 

value other than “0” or “1” in the Input column of Field Identification Number 1000000 
(refer to 

). 

Figure 187   Invalid Parameter Entered: Command Line Example

The ZyXEL Device will display the following if you enter parameter(s) that are valid.

Figure 188   Valid Parameter Entered: Command Line Example

1 Launch your FTP application.

2 Enter "

bin

". The command “

bin

” sets the transfer mode to binary.

3 Get "

rom-t

" file. The command “

get

” transfers files from the ZyXEL Device to your 

computer. The name “

rom-t

” is the configuration filename on the ZyXEL Device.

4 Edit the "

rom-t

" file using a text editor (do not use a word processor). You must leave 

this FTP screen to edit.

field value is not legal error:-1

ROM-t is not saved, error Line ID:10000000

reboot to get the original configuration

Bootbase Version: V2.02 | 2/22/2001 13:33:11

RAM: Size = 8192 Kbytes

FLASH: Intel 8M *2

Please wait for the system to write SPT text file(ROM-t)...

Bootbase Version: V2.02 | 2/22/2001 13:33:11

RAM: Size = 8192 Kbytes

FLASH: Intel 8M *2