ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 3 Wizard Setup

57

The following table describes the labels in this screen.

This screen allows you to automatically configure security settings on your ZyXEL Device 
and the wireless clients that want to connect to it. See 

 for more 

information on OTIST.

Figure 15   Manually Assign a WEP key

Table 9   Manually Assign a WEP key

Passphrase

Enter a Passphrase (up to 32 printable characters) and clicking Generate. The ZyXEL 
Device automatically generates a WEP key.

WEP 
Encryption

Select 64-bit WEP, 128-bit WEP or 256-bit WEP to specify data encryption. 64-bit 
WEP is the weakest encryption and 256-bit WEP is the strongest.

Key 1 - Key 4

The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless 
stations must use the same WEP key for data transmission.

You can set 4 different keys and make one of the keys active at a time.

If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII 
string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or 
256-bit WEP key respectively.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.