ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 3 Wizard Setup

55

Figure 12   Wireless LAN 

The following table describes the labels in this screen.

Choose Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with customized 
key) in the Wireless LAN setup screen to set up a Pre-Shared Key.

Table 7   Wireless LAN Setup Wizard 2

Name(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless 
LAN. 

If you change this field on the ZyXEL Device, make sure all wireless stations use the 
same SSID in order to access the network. 

Channel 
Selection

The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a 
channel. Select a channel ID that is not already in use by a neighboring device.

Security

Select Auto(WPA-PSK with self-generated key), if you want OTIST to configure a 
WPA key for you.

Select Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with 
customized key) to configure a Pre-Shared Key (WPA-PSK). Choose this option only 
if your wireless clients support WPA or WPA2. See 

 for 

more information.

Select Basic(WEP) to configure a WEP Key. See 

information.

Select None to have no wireless LAN security configured and your network is 
accessible to any wireless networking device that is within range.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.