ZyXEL p-2802h-i1 Guia Do Utilizador

 Chapter 19 Remote Management Configuration

P-2802H(W)(L)-I Series User’s Guide

Figure 157   Remote Management: FTP

The following table describes the labels in this screen. 

Simple Network Management Protocol (SNMP) is a protocol used for exchanging 
management information between network devices. SNMP is a member of the TCP/IP 
protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a 
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL 
Device supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure 
illustrates an SNMP management operation.

"

SNMP is only available if TCP/IP is configured.

Table 107   Remote Management: FTP

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Cancel

Click Cancel to begin configuring this screen afresh.