ZyXEL p-2802h-i1 Guia Do Utilizador

 Chapter 19 Remote Management Configuration

P-2802H(W)(L)-I Series User’s Guide

The ZyXEL Device will send traps to the SNMP manager when any one of the following 
events occurs:

To change your ZyXEL Device’s SNMP settings, click Advanced > Remote MGMT > 
SNMP. The screen appears as shown.

Figure 159   Remote Management: SNMP

Table 108   SNMP Traps

0

coldStart (defined in RFC-1215)

A trap is sent after booting (power on).

1

warmStart (defined in RFC-1215)

A trap is sent after booting (software reboot).

4

authenticationFailure (defined in 

RFC-1215)

A trap is sent to the manager when receiving any 

SNMP get or set requirements with the wrong 

community (password).

6

whyReboot (defined in ZYXEL-

MIB)

A trap is sent with the reason of restart before 

rebooting when the system is going to restart (warm 

start).

6a

For intentional reboot:

A trap is sent with the message "System reboot by 

user!" if reboot is done intentionally, (for example, 

download new files, CI command "sys reboot", etc.).

6b

For fatal error: 

A trap is sent with the message of the fatal code if the 

system reboots because of fatal errors.