ZyXEL p-2802h-i1 Guia Do Utilizador

Chapter 6 WAN Setup

P-2802H(W)(L)-I Series User’s Guide

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced 
Setup button in the Internet Access Setup screen. The screen appears as shown.

Figure 38   Advanced Internet Access Setup

The following table describes the labels in this screen.  

Connection 
(PPPoE 

encapsulation only)

Nailed-Up 

Connection

Select Nailed-Up Connection when you want your connection up all the time. 

The ZyXEL Device will try to bring up the connection automatically if it is 

disconnected.

Connect on 

Demand

Select Connect on Demand when you don't want the connection up all the time 

and specify an idle time-out in the Max Idle Timeout field.

Max Idle 

Timeout

Specify an idle time-out in the Max Idle Timeout field when you select Connect 

on Demand. The default setting is 0, which means the Internet session will not 

timeout.

Apply

Click Apply to save the changes. 

Cancel

Click Cancel to begin configuring this screen afresh.

Advanced Setup

Click this button to display the Advanced WAN Setup screen and edit more 

details of your WAN setup.

Table 20   Internet Access Setup (continued)

Table 21   Advanced Internet Access Setup

RIP & Multicast 

Setup

RIP Direction

RIP (Routing Information Protocol) allows a router to exchange routing information 

with other routers. Use this field to control how much routing information the ZyXEL 

Device sends and receives on the subnet.
Select the RIP direction from None, Both, In Only and Out Only.

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast

Multicast packets are sent to a group of computers on the LAN and are an 

alternative to unicast packets (packets sent to one computer) and broadcast 

packets (packets sent to every computer).
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to 

establish membership in a multicast group. The ZyXEL Device supports both IGMP 

version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.