ZyXEL p-2802h-i1 Guia Do Utilizador

 Chapter 6 WAN Setup

P-2802H(W)(L)-I Series User’s Guide

Use this screen to configure your ZyXEL Device’s WAN interface setting. Click Network > 
WAN > WAN Interface Setup. If you prefer not to use a VDSL line and you have another 
broadband modem or router (such as ADSL) available, you can set the first Ethernet port as 
the WAN port and connect that to the broadband modem or router. This way, you can access 
the Internet via an Ethernet connection and still use the QoS, Firewall and VoIP functions on 
the ZyXEL Device.

Figure 39   WAN Interface Setup

The following table describes the labels in this screen.  

Back

Click Back to return to the previous screen.

Apply

Click Apply to save the changes. 

Cancel

Click Cancel to begin configuring this screen afresh.

Table 21   Advanced Internet Access Setup (continued)

Table 22   WAN Interface Setup

Active Ethernet 

WAN

Select the check box to set the first Ethernet port as a WAN port. The VDSL port 

will then be disabled automatically.
This allows the ZyXEL Device to work as an Ethernet gateway, instead of a VDSL 

router. To access the Internet, connect the first Ethernet port to a broadband 

modem or router.
The ZyXEL Device restarts after you select or clear the check box and click Apply.

Apply

Click Apply to save the changes. 

Cancel

Click Cancel to begin configuring this screen afresh.