ZyXEL nbg-5715 Guia Do Utilizador
Chapter 11 Wireless LAN
NBG5715 User’s Guide
90
11.5 The Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
and high-throughput physical mode settings.
and high-throughput physical mode settings.
Click Network > Wireless LAN 2.4G/5G > Advanced. The screen appears as shown.
Figure 48
Network > Wireless LAN 2.4G/5G > Advanced
The following table describes the labels in this screen.
11.6 The QoS Screen
The QoS (Quality of Service) screen allows you to automatically give a service (such as VoIP and
video) a priority level.
video) a priority level.
Table 33
Network > Wireless LAN 2.4G/5G > Advanced
LABEL
DESCRIPTION
RTS/CTS
Threshold
Threshold
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
Send)/CTS (Clear To Send) handshake.
Fragmentation
Threshold
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed
messages. It is the maximum data fragment size that can be sent.
messages. It is the maximum data fragment size that can be sent.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless
clients or between a wireless client and a wired network client go through one
access point (AP).
access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is
enabled, wireless clients can access the wired network and communicate with
each other. When Intra-BSS is disabled, wireless clients can still access the wired
network but cannot communicate with each other.
enabled, wireless clients can access the wired network and communicate with
each other. When Intra-BSS is disabled, wireless clients can still access the wired
network but cannot communicate with each other.
advance tx
power
power
Set the output power of the NBG5715 in this field. If there is a high density of APs
in an area, decrease the output power of the NBG5715 to reduce interference with
other APs. Select one of the following 100%, 90%, 75%, 50%, 25% or 10%.
See the product specifications for more information on your NBG5715’s output
power.
in an area, decrease the output power of the NBG5715 to reduce interference with
other APs. Select one of the following 100%, 90%, 75%, 50%, 25% or 10%.
See the product specifications for more information on your NBG5715’s output
power.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to reload the previous configuration for this screen.