ZyXEL nbg-5715 Guia Do Utilizador

Chapter 11 Wireless LAN

NBG5715 User’s Guide

The following table describes the labels in this screen.

Use this screen when you want to add a wireless station using WPS. To open this screen, click 
Network > Wireless LAN 2.4G/5G > WPS Station tab.

Note: After you click Push Button on this screen, you have to press a similar button in 

the wireless station utility within 2 minutes. To add the second wireless station, you 

have to press these buttons on both device and the wireless station again after the 

first 2 minutes.

Network > Wireless LAN 2.4G/5G > WPS Station

Network > Wireless LAN 2.4G/5G > WPS

WPS Setup

WPS

Select Enable to activate the WPS feature. Select Disable to turn it off.

PIN Number

This displays a PIN number last time system generated. Click Generate to 
generate a new PIN number.

WPS Status

Status

This displays Configured when the NBG5715 has connected to a wireless 
network using WPS or when Enable WPS is selected and wireless or wireless 
security settings have been changed. The current wireless and wireless security 
settings also appear in the screen.

This displays Unconfigured if WPS is disabled and there are no wireless or 
wireless security changes on the NBG5715 or you click Release_Configuration 
to remove the configured wireless and wireless security settings.

Release 
Configuration

This button is only available when the WPS status displays Configured.

Click this button to remove all configured wireless and wireless security settings 
for WPS connections on the NBG5715.

802.11 Mode

This is the 802.11 mode used. Only compliant WLAN devices can associate with 
the NBG5715.

SSID

This is the name of the wireless network (the NBG5715’s first SSID).

Security

This is the type of wireless security employed by the network.

Apply

Click Apply to save your changes back to the NBG5715.

Cancel

Click Cancel to reload the previous configuration for this screen.