ZyXEL p-660hwp Manual Do Utilizador

 Chapter 17 Remote Management Configuration

P-660HWP-Dx User’s Guide

Figure 139   Remote Management: FTP

The following table describes the labels in this screen.

Simple Network Management Protocol (SNMP) is a protocol used for exchanging 
management information between network devices. SNMP is a member of the TCP/IP 
protocol suite. Your P-660HWP-Dx supports SNMP agent functionality, which allows a 
manager station to manage and monitor the P-660HWP-Dx through the network. The P-
660HWP-Dx supports SNMP version one (SNMPv1) and version two (SNMPv2). The next 
figure illustrates an SNMP management operation.

"

Table 100   Remote Management: FTP

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the P-660HWP-Dx 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the P-

660HWP-Dx using this service. 
Select All to allow any computer to access the P-660HWP-Dx using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the P-660HWP-Dx using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Cancel

Click Cancel to begin configuring this screen afresh.