ZyXEL p-660hwp Manual Do Utilizador

Página de 402
Chapter 17 Remote Management Configuration
P-660HWP-Dx User’s Guide
42
The following table describes the labels in this screen.
17.7  Configuring DNS 
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and 
vice versa. Refer to the chapter on LAN for background information. 
To change your P-660HWP-Dx’s DNS settings, click Advanced > Remote MGMT > DNS
The screen appears as shown. Use this screen to set from which IP address the P-660HWP-Dx 
will accept DNS queries and on which interface it can send them your P-660HWP-Dx’s DNS 
settings.
Table 102   Remote Management: SNMP
LABEL
DESCRIPTION
SNMP
Port
You may change the server port number for a service if needed, however you 
must use the same port number in order to use that service for remote 
management.
Access Status
Select the interface(s) through which a computer may access the P-660HWP-
Dx using this service.
Secured Client IP
A secured client is a “trusted” computer that is allowed to communicate with the 
P-660HWP-Dx using this service. 
Select All to allow any computer to access the P-660HWP-Dx using this 
service.
Choose Selected to just allow the computer with the IP address that you specify 
to access the P-660HWP-Dx using this service.
SNMP Configuration
Get Community
Enter the Get Community, which is the password for the incoming Get and 
GetNext requests from the management station. The default is public and 
allows all requests.
Set Community
Enter the Set community, which is the password for incoming Set requests 
from the management station. The default is public and allows all requests.
TrapCommunity
Type the trap community, which is the password sent with each trap to the 
SNMP manager. The default is public and allows all requests.
TrapDestination
Type the IP address of the station to send your SNMP traps to.
Apply
Click Apply to save your customized settings and exit this screen. 
Cancel
Click Cancel to begin configuring this screen afresh.